Ideal for all types of spraying both around the home and for professional users as well as with industrial and construction environments. The 2.5-metre hose gives you flexibility and the FPM seals allow you apply a wide range of solutions.

The Profi Plus can also be used with an air compressor which saves you time as you will have a constant supply of air when you need to spray. To take advantage of this you will require a compressor handle which you will find in the accessories section above.

• Tank capacity - 8 litres
• Tank working capacity - 5 litres
• Tank Ullage - 3 litres
• Maximum working pressure - 3 bar
• Unit weight - 2.6 kg
• Lance - 50cm brass
  
• Tank construction - plastic
• Carried by a shoulder straps, trolley or hand
• Nozzle supplied - brass flat jet with filter
  
• Hose - 2.5 metres, recoil
  
• Pump - plastic, 38mm with steel piston rod
• Compressor compatible
• Seals - FPM - Synthetic rubber with high elasticity properties which makes it a very good product for the protection of seals and O-rings. FPM seals are are highly resistant to hydrocarbons, oils, strong acids, aromatic and chlorinated solvents and has a high temperature resistance.
• 20 years spare part guarantee
  

*We recommend a full compatibility test with aggressive chemical solutions. If you are unsure about a product that you plan to use then send us the safety data sheet (MSDS) for the product and we will check compatibility and recommend an alternative sprayer if necessary.

Whilst not a definitive guide, this will give you an indication as to the chemical resistance of this sprayer. Next to each item you will see either YES (resistant), CON (conditionally resistant) or NO (unsuitable). This is only a guide but if you can't see the chemical you plan to use or have any questions then please just contact us.

Acids

• Acetic Acid (maximum 10%): NO
• Silicic Acid: YES
• Peracetic Acid (maximum 6%): CON
  
• Phosphoric Acid (maximum 30%): YES
• Nitric Acid (maximum 10%): CON
• Hydrochloric Acid (maximum 10%): CON
  
• Aulphuric Acid (40%): CON
  

Alcohol

• Butanol: NO
  
• Ethanol: NO
• Methanol: NO
  
• Isobutanol: YES
• Isporopanol: YES

Aliphatic Hydrocarbons

• Decane: CON
  
• N-Heptane: YES
  
• N-Butane: CON
  

Aromatic Hydrocarbons

• Naphtha: YES
• Toluol (maximum 40%): YES
• Xylene: YES
  
• Heptaphene: YES
  

Oils

• Diesel: YES
  
• Kerosene: YES
  
• Mineral Oil: YES
  
• Petroleum Spirit: NO
• Concrete Release Agent: YES

Alkalines

• Acetone: NO
  
• Ammonia: NO
• Sodium Carbonate: YES
• Sodium Hydroxide (maximum 30%): NO
  
• Potassium Hydroxide: NO
• Sodium Hypochlorite (maximum 12.5%): CON

Can I use this sprayer with your telescopic lances?

Yes. This sprayer can be used with either our 3.2 metre or 5.4 metre telescopic lances, as well as other lance extensions within our range. All of these can be found in the accessories section above which will include all connectors if required.

Is there a benefit to having this type of hose?

The Profi Plus sprayer has a recoil hose which is unusual for sprayers, the vast majority of which have a standard hose configuration. The benefit of a recoil hose is that you can have a much longer length of hose which only takes up a small amount of space and it is easy to keep tidy. This sprayer has 2.5 metres of hose which is double the length of many of the sprayers within our range. This is a huge benefit, compared to other sprayers, as it gives you flexibility when spraying.

Why are these sprayers more expensive than others you offer?

Build quality, replacement parts, accessories and the type of seals that are used. All of the sprayers within our range are very good, quality sprayers and will, if looked after, last you many years however you pay for what you get. The reason why the Profli and Profli Plus sprayers are more expensive than others we offer is the overall strength and robustness of the tank, high quality seals, 2.5 metre recoil hose and general build quality. The Profi Plus has FPM seals which are resistant to not only pH neutral products but also acidic solutions. These sprayers are not designed to be used a few times, thrown away and a replacement bought. They are designed to last you many years and have parts replaced when they wear or are broken. Also, with the range of accessories we have, one sprayer is able to handle many different type of job.

What is Tank Ullage?

Ullage is the name given to the difference between the maximum liquid fill level and the tank capacity therefore the empty space. This is very important as this space decides how much air you can compress into the tank therefore the length of spraying time available before having to re-compress the tank. The more ullage then the longer you can spray.