Skip to product information
photo of thick foam and bubbles on surface of water in industrial booth
  • photo of thick foam and bubbles on surface of water in industrial booth
  • photo showing our foam suppressant being poured
  • photo showing foam on surface of water tank
  • photo of thick foam and bubbles on surface of water in industrial booth
  • photo showing our foam suppressant being poured
  • photo showing foam on surface of water tank
Anti-Foam - HSS PLUS

Anti-Foam - HSS PLUS

Liquid defoamer for use in industrial waters. It will eliminate foaming and bubbles from all types of water installation especially within paint spray booths.
£16.50
Shipping calculated at checkout.
Description

HSS PLUS is a liquid defoamer for use in industrial waters where Its high power will eliminate foaming, bubbles and scum from all types of water installation especially within paint spray booths and any production process that may produce thick, persistent foam.

Anti-Foam HSS PLUS contains a mineral oil so is ideal for use in installations with vigorous or turbulent water movements that cause persistent foam or for any process that creates thick and heavy foam deposits.

When adding HSS PLUS to your installation, it is best added to agitated areas of water which will allow for its complete dilution, quick dispersion, lower dosages and quicker results.  If unable to add to this type of area, we recommend diluting HSS PLUS, prior to dosing, up to 20% (1 : 5, product : water).
Specification
  • Product Name - Anti-Foam HSS PLUS
  • Colour - Cream/white
  • pH - 7.5
  • Density - 1.1 g/m3
  • Conditions to Avoid - Frost
  • Physical State - Liquid
  • Dosage - Approximately 20ml per 1000 litres depending upon level of foaming and agitation
Technical Sheets
FAQs

How much HSS PLUS should I add to my spray booth?

HSS is a very economical product so a little goes a very long way. Whilst it can be quite difficult to be exact with your additions you would be looking to add around 20ml - 30ml, per dose, to a 1000-litre capacity tank. The size of the dose is dependent upon the amount of foam and its consistency so if you have very thick foam forming or the water within your booth is very turbulent a larger addition may be required. HSS PLUS can be added manually in single doses or by a dosing machine which will delivery a measured amount over a set period of time.

How often do I need to add HSS PLUS?

As with Promousse, you should only make additions of HSS PLUS when required. We do not recommend making additions to your water until foaming becomes an issue with the operation of the booth or with the process.

How is the foam killed?

Our anti foam solutions (HSS PLUS & Promousse) work by creating a film across the surface of the water and it is this film that stops the creation of new foam. If adding to an industrial installation then making your additions in an turbulent area or beside a pump inlet will allow the products to be mixed properly thus allowing it to be at its most potent.

What is the difference between HSS PLUS & Promousse?

Whilst they are both defoaming products and they both work in the same way, the two products are very different. Promousse contains ethoxylated alcohols which makes the product slightly more user friendly however not as effective as the HSS PLUS which contains mineral oils. This is why we recommend HSS PLUS for heavier and persistent foaming deposits which Promousse may struggle with or would require larger additions.

If you are uncertain which of the products would be most suited for you installation then we recommend testing both.

You may also like