Skip to product information
photo showing foam on surface of water tank
  • photo showing foam on surface of water tank
  • photo of the container and label for our anti foam liquid additive
  • photo showing our foam suppressant being poured
  • photo of thick foam and bubbles on surface of water in industrial booth
  • photo showing foam on surface of water tank
  • photo of the container and label for our anti foam liquid additive
  • photo showing our foam suppressant being poured
  • photo of thick foam and bubbles on surface of water in industrial booth
Anti-Foam - Defoamer

Anti-Foam - Defoamer

Liquid defoamer for use in industrial waters. It will eliminate foaming and bubbles from all types of water installation especially within paint spray booths.
£14.50
Shipping calculated at checkout.
Description

Promousse is a liquid defoamer for use in industrial waters. It will eliminate foaming, bubbles and scum from all types of water installation especially within paint spray booths.

Promousse does not contain silicone so is ideal for paint spraying and other preparation areas where surface contamination with oils could, potentially, cause issues with the quality of the final finish.

As Promousse is a liquid it is very easy to mix with the foaming water therefore it is very fast acting. A standard dosage would be approximately 30ml per 1000-litres of water. When dosing industrial water installations we recommend making a single small addition and monitoring the water for a few minutes then making additional additions if required.  Promousse is best added to agitated areas of water which allows for quick dispersion therefore lower doses and faster actions.  If the water is still or slow moving then we suggest agitating the water manually whilst making the addition.

This is a very high concentrate that is therefore very economical.
Specification
  • Product Name - Promousse
  • Colour - Cream/white
  • pH - 4
  • Density - 0.86
  • Conditions to Avoid - Frost
  • Physical State - Liquid
  • Dosage - Approximately 20ml per 1000 litres depending upon level of foaming and agitation
Technical Sheets
FAQs

How much Promousse should I add to my spray booth?

Promousse is a very economical product meaning that a little goes a very long way. Whilst you do not to be exact with your additions you would be looking to add around 20ml - 30ml, per dose, to a 1000-litre capacity tank. The size of the dose is dependent upon the amount of foam so if you have very thick foam forming or the water within your booth is very turbulent a larger addition may be required.

How often do I need to add Promousse?

You should only make additions when required. We do not recommend adding Promousse to your water until foaming becomes an issue with the operation of the booth.

How does Promousse kill the foam?

Promousse works by creating a film across the surface of the water and it is this film that stops the creation of new foam. If adding to an industrial installation then making your additions in an turbulent area or beside a pump inlet will allow the Promousse to be mixed properly thus allowing it to be at its most potent.

Can I use Promousse in any other types of water?

You can use Promousse in any water that isn't intended for human consumption. If the water is in contact with any type of finished surface then we recommend undertaking a patch test. If you are unsure about your proposed application then just contact us and we can confirm the suitability.

Can I automatically dose this product?

Many users with larger installations do choose to dose their water automatically and Promousse can certainly be used this way. We recommend setting the equipment to add a larger dose size with a lower frequency.

You may also like