Skip to product information
composite boards can be cleaned with Composite Cleaner HS
1/2
  • composite boards can be cleaned with Composite Cleaner HS
  • Composite Cleaner HS can be used to clean all types of composite flooring
  • composite boards can be cleaned with Composite Cleaner HS
  • Composite Cleaner HS can be used to clean all types of composite flooring
Composite Cleaner HS

Composite Cleaner HS

£39.50
Shipping calculated at checkout.

Clean & maintain all types of composite flooring sheets
Description

Composite Cleaner HS is very effective for cleaning all types of composite, man-made and manufactured boards including veneers. It effectively removes greasy stains, wine stains, rings, mould and dirt without bleaching.

Our research, carried out by our laboratory team, has made it possible to obtain a powerful and efficient product that is easy to use and will not damage manufactured surfaces. Coverage rate varies depending upon the surface and level of cleaning so a litre of Composite Cleaner will cover 30m² for difficult tasks and up to 300m² for daily cleaning.
Specification

For general cleaning mix 1-litre with 9-litres of water and apply to the surface.

If a heavier clean is needed mix 1-litre with 3 - 3.5-litres of water and apply to the surface.

For the removal of grease and oil mix 1-litre with 2.5-litres of water and apply to the surface.

Allow to stand for 5 - 10 minutes (do not allow it to dry) and rub gently with a brush before rinsing the area with water.

Please remember that this is a very effective and powerful cleaning product therefore Composite Cleaner should not be applied in bright, direct sunshine or staining could occur.

We recommend using hot water to make the cleaning solution.
FAQs

Why do I have to rinse the surface?

Composite Cleaner HS is a strong and effective cleaner designed for all types of composite surface. The rinsing is intended to not only rinse the product from the surface but also to help remove the dirt that has lifted.

Why can't I apply this in direct sunlight?

We recommend not applying HS in strong, direct sunlight or in high temperatures as there could be an adverse reaction which could lead to staining of the surface especially if using as a stronger solution. This doesn't mean that you have to work in the dark, just not on a day with strong, direct sunlight or high temperatures. There are a number of reason why working in these conditions are not ideal firstly if the surfaces are hot then they will dry quickly which may not allow ample time for the Composite Cleaner HS to work to its maximum and secondly very strong direct sunlight can cause damage to surfaces if not monitored.

You may also like