Evaclean

SKU: 5 litre - 1520 / 20 litre - 2654

Available: 20 units available for Priority Delivery

A lubricant intended for the cutting, stamping, bending and drawing all types of metal parts including steel, stainless steel, light alloys and copper. As this is an evanescent product no de-greasing is required for its removal as it will fully evaporate
Regular price
£36.00
£36.00
Regular price
Sale price
Unit price
 per 

Description

Product Specification

FAQs

EVACLEAN is a lubricant intended for the cutting, stamping, bending and drawing all types of metal parts including steel, stainless steel, light alloys and copper alloys. As this is an evanescent product no de-greasing is required for its removal as it will fully evaporate.

EVACLEAN has the particularity of evaporating some time after application which avoids any de-greasing for subsequent operations such as handling, bonding, painting, marking and welding operation. The formulation does not include chlorine or sulphur which means that it will not stain copper alloys.

  • Density at 15°C - 0.77
  • Closed cup flash point - > 65°C
  • Viscosity at 20°C - 1.26 mm²/s at 25°
  • Evaporation rate - 4.5
  • Aromatic content - 0.003%
  • Application - brush, roller, felt pen, hand sprayer or automatic spraying

Evaclean should be used in its neat form and should not be diluted prior to use.

  • Density at 15°C - 0.77
  • Closed cup flash point - > 65°C
  • Viscosity at 20°C - 1.26 mm²/s at 25°
  • Evaporation rate - 4.5
  • Aromatic content - 0.003%
  • Application - brush, roller, felt pen, hand sprayer or automatic spraying

Can I still degrease the parts after bending?

You can degrease if the finish of the final product requires however you do not need to degrease to remove the Evaclean as it is formulated so that degreasing is not required.