Skip to product information
Ferrox Plus - Metal Sprayer
  • Ferrox Plus - Metal Sprayer
  • Ferrox Plus - Metal Sprayer
  • Ferrox Plus - Metal Sprayer
  • Ferrox Plus - Metal Sprayer
  • Ferrox Plus - Metal Sprayer
  • Ferrox Plus - Metal Sprayer
Ferrox Plus - Metal Sprayer

Ferrox Plus - Metal Sprayer
£166.00
Shipping calculated at checkout.
Description

6 BAR maximum working pressure & FPM seals for for resistance to some acidic, neutral and certain mild alkaline products. 2.5 metre recoil hose, pressure gauge, padded shoulder straps & professional stop valve set-up.
Specification
  • Total tank capacity - 9 litres
  • Tank working capacity - 6 litres
  • Tank Ullage - 3 litres
  • Maximum working pressure - 6 bar
  • Sprayer weight - 4.8 kg
  • Tank construction - polyester coated steel
  • pH range - 5-9*
  • Carry Method - Shoulder, hand or by trolley
  • Nozzle - brass flat jet with filter
  • Lance - 50cm brass
  • Pressure Gauge - Fitted to tank
  • Compressor Compatible - Yes
  • Hose - 2.5 metre recoil with safety lock
  • Pump - brass 38mm
  • Air Filling - Hand compression or compressed air
  • Seals - FPM - Synthetic rubber with high elasticity properties which makes it a very good product for the protection of seals and O-rings. FPM seals are are highly resistant to hydrocarbons, oils, strong acids, aromatic and chlorinated solvents and has a high temperature resistance.
  • 20 years spare parts supply GUARANTEED

*We recommend a full compatibility test with aggressive chemical solutions. If you are unsure about a product that you plan to use then send us the safety data sheet (MSDS) for the product and we will check compatibility and recommend an alternative sprayer if necessary.
Technical Sheets
FAQs

Why is the tank size different from the working capacity?

With compression sprayers you must have room, within the tank, to pressurise air which will then push the liquid out of the tank. This is why there is a difference and this difference is called ullage. This sprayer has a 13-litre tank but we recommend a maximum fill of 10-litres which gives an ullage of 3-litres which you pressurise when you pump the compression handle. The more pressurised air that there is within the tank then the longer spray time between stopping and re-pressurising the tank. Be careful when buying sprayers as you need to know the fill volume/capacity not the tank size.

Why should I use a Stainless Steel sprayer?

They are strong, look very good, are robust and give very good chemical resistance when used in conjunction with the FPM seals. If you are trying to decide whether a stainless steel tank or a steel tank is the best option for you, the main difference is that the steel tanks are painted to protect the steel from the housed liquids. This means that if the internal paint is damaged, maybe the tank has been dented, then the hosed liquid can get in contact with the steel and start to corrode the tank. Basically, stainless steel tanks should have a longer lifespan than steel tanks.

You say that this sprayer can be used at 6 BAR, how do I know when it is at pressure?

The Ferrox Plus sprayers have a pressure gauge fitted which will show you the air pressure within the tank. This is very helpful as sometimes you will just want the most pressure possible especially if you are trying to spray a very thick liquid but some products will recommend a spraying pressure for optimum performance. With the gauge you can see exactly the pressure that you are spraying.

Can this sprayer be used with the telescopic lances?

Yes, these sprayers can be used with all of the telescopic lances within our range. It can also be used with the lance extensions (for when you need just a little extra reach) and the wide range of nozzles.

You may also like