Skip to product information
rusted metal surface with treated section ready for paint
  • rusted metal surface with treated section ready for paint
  • lorry chassis protected from rust with our rust prevention liquid
  • photo of a treated rusty surface showing the treated and untreated surface
  • rusted metal surface with treated section ready for paint
  • lorry chassis protected from rust with our rust prevention liquid
  • photo of a treated rusty surface showing the treated and untreated surface
Rust Cover 1.5

Rust Cover 1.5

Apply directly to a rust covered surface to create a protective vinyl film that will prevent further oxidation and acts as a primed surface upon which paint can be applied.
£75.20
Shipping calculated at checkout.
Description

If rust is allowed to persist, it will weaken metal surfaces.  As the rust is brittle and unstable, it can’t be painted over and will cause painted surfaces to break down, with the paint starting to bubble or flake. To prevent the formation of rust, the metal surface needs to be protected from air and water. This is what RUST COVER 1.5 does when applied to a surface; it reacts with the rust to form a black, vinyl-type layer, stopping the formation of rust and providing a stable base for painting.  

Rust Cover 1.5 can be used on a range of metal surfaces, such as:

- metal structures
- tanks
- machine frames, etc.

Applied directly to rust, Rust Cover 1.5 forms a chemical complex with it, providing the benefits of passivation, phosphating, and vinyl protection. Surfaces treated outdoors can wait several days before being painted without the risk of rust formation, even if exposed to the elements.

When applied to oxidised galvanised surfaces, Rust Cover 1.5 prevents the development of rust.

Treated metal surfaces can be coated with two and one-component paints, including epoxy and polyurethane paints.

Rust Cover 1.5 can be applied to non-greasy surfaces in its pure form. It can be applied either:

- by brush
- by spray gun
- in a bath

Rust Cover 1.5 is an off white liquid and stays in this form while being applied to the surface.  It slowly reacts with the rust and starts to dry, causing the surface to turn black.  Once completely dry, the surface is ready to be painted.  Treated surfaces can be left outside for several days before painting without the risk of new rust forming. 

Before applying paint, allow the product to air dry thoroughly.
Specification
  • Density: 1.30 g/cm3 at 20°C
  • Appearance: Liquid
  • Colour: Pale white
  • Odour: Very mild & faint odour
  • Solubility: Total in water
  • Flammability: Non-flammable
Technical Sheets

Rust Cover Technical Sheet

Product label
FAQs

Can I paint straight on to rust?

You shouldn't paint directly on to a rusty surface however you can apply Rust Cover 1.5 directly on to a rusty surface and paint upon this layer. However, you should do some preparation of the surface before applying Rust Cover 1.5.

Do I need to do anything to the rusty surface?

We recommend brushing the surface to remove any loose rust or original paint prior to the application of Rust Cover 1.5. If the surface has any oil or grease upon it then this should also be removed with a degreasing agent to ensure that the surface is grease and dust free as well as dry before treatment.

What is the easiest way to apply this?

We feel that for the majority of surfaces, brushing is the easiest application as the brush allows, even the hardest and most awkward places, to be coated. Brushes are also easy to clean afterwards. However, for large surfaces, spraying can save a lot of time. The spraying can be done with a compressed air system or with a standard compression sprayer.

You may also like