Skip to product information
Proco SA303 - 20kg
  • Proco SA303 - 20kg
  • lacquer separated from spray booth water as part of a titration test
  • photo showing the water curtain in a wet spray booth. this water can be treated with Probio to ensure safe levels of bacteria growth are maintained.
  • Proco SA303 - 20kg
  • lacquer separated from spray booth water as part of a titration test
  • photo showing the water curtain in a wet spray booth. this water can be treated with Probio to ensure safe levels of bacteria growth are maintained.
Proco SA303 - 20kg

Proco SA303 - 20kg

Liquid, spray booth additive designed for the treatment of spray booth sludge, that remains sticky. Use with solvent-based and water-based paints and lacquers and within spray booths.
£98.00
Shipping calculated at checkout.
Description

Proco SA303 is a highly active, denaturing coagulant for the treatment of industrial water contaminated with solvent-based or water-based paint, lacquer, glue, and varnish.

Whilst suited for use with a wide variety of coatings, Proco SA303 is very effective at not only the coagulation and flocculation of very sticky coatings (especially solvent-based lacquers) but also stops them sticking and hardening at the bottom spray booth tanks, within pipes, nozzles, and pumps.

Proco SA303 is generally used in conjunction with Proco SP3204 for the complete treatment of contaminated water, the separation of solids, and their filtration.

 
Specification
  • APPEARANCE - Clear viscous liquid
  • PH - 3.4
  • DENSITY - 1.06
  • SOLUBILITY - Total in water
  • ECOLOGY - Biodegradable
  • CONCENTRATION - 1% when added to clean water
Technical Sheets

Technical Sheet - Proco SA303

Product Label - Proco SA303
FAQs

Do I have to empty the water from my spray booth before starting with Proco SP3204?

If your spray booth water contains a small amount of sludge and doesn't contain any chemicals (other than your paint overspray), then there is a very good chance that we can start a treatment without having to change your booth water. If, however, the water has a large amount of sludge, within the tank, or contains chemicals other than your paint then we would recommend changing the booth water and starting the treatment with a tank containing fresh water.

The pipes & nozzles are always blocking, will using Proco SP3204 reduce this?

Proper dosing will certainly reduce blockages both within pipes, pumps and nozzles. When used correctly, it will stop coatings from sticking and keep it suspended within the booth water.

Will using Proco SP3204 stop smells from my booth water?

Proco SP3204 does not contain a biocide (which is designed to kill bacteria within the water) therefore, should it be required, PROBIO can be added to booth water to stop smells. However, the removal of sludge, from the system, will greatly reduce the possibility of smells so using Proco SP3204 can help with the situation.

You may also like